AmpViewer Microwave Power Amplifier Management Program.
The wiring diagram of the XP1 control connector for the UM5762-90I and UM7984-90I microwave power amplifiers
Contact | Designation | Description |
1 | RF_EN | Power lock |
2 | SYSCOM | Earth (SYSCOM) |
3 | – | Free contact |
4 | DIG_AN | Discrete/RS422 |
5 | AMP_ON | Turn on the mind |
6 | AMP_ON_LIGHT | Signal “UM on” |
7 | POUT_LIGHT | Burst Signal |
8 | TMP_LIGHT | Overheat Signal |
9 | FLT_LIGHT | Alarm Signal |
10 | G_UP | Gain increase |
11 | G_DOWN | Gain reduction |
12 | 10,5V | +10.5V for remote control |
13 | RS422 RX+ | RS422 RX+ |
14 | RS 422 RX– | RS 422 RX– |
15 | RS 422 TX+ | RS 422 TX+ |
16 | RS422 TX– | RS422 TX– |
17 | EN_FAN | Fan on |
18 | Uadj_FAN | Fan speed adjustment |
19 | GND | Enclosure (Not Power) |
Panel with power, control and microwave connectors for UM6-60 (-90), UM5-100, UM8-60 (-90)
Connector | Function | Description | Mating connector |
XW1 | Microwave input | 7/3 Socket | 7/3 Pin |
XP1 | Serial interface | Plug RO17TV AB0.346.047TU | Plug RO7TV AB0.346.047TU |
XP2 | Discrete interface (wire-command) | Plug ROG07TV AB0.346.047TU | Plug RO10TV AB0.346.047TU |
XP3 | AC line ~ 220V | 2RMGD18B4SHBE2 | 2RMGD18B4SHBE2 |
X1 | Microwave output | Waveguide 35 x 15 or 28.5 x 12.6 | Waveguide 35 x 15 or 28.5 x 12.6 |
Serial interface
Comte | Designation | Appointment |
1 | TX422 H | Serial Transmit Port T+X |
2 | TX422 L | Serial transmit port Т-Х |
3 | RX422 H | Serial receive port Т+Х |
4 | RX422 L | Serial receive port Т-Х |
5 | System common | System shared |
7 | Ground | Housing |